113
18.6. Storing or Recalling Parameters Set at the Unit
You can back up the parameters set at the unit to your PC, or transfer the parameters stored in your PC to the
unit.
Step 1. Double-click the "MaintCtrl.exe" icon to run the 9000 series
maintenance software.
The screen at right is displayed.
Step 2. Click the "Parameter file" button.
The window at right opens.
Tip
You can also set the communication port and speed here
when pressing the "Option" button on the menu bar to
select "Communication Setting."
Step 3. Click the "9000 to PC" button when
storing parameters set at the unit to
your PC, while click the "PC to 9000"
button to transfer parameters stored in
your PC to the unit.
The window at right opens.
Step 4. Perform the following key operations at the unit to permit data transmission/reception between the
unit and the PC.
4-1. Turn the power switch off.
4-2. Press the Input channel 8 selection key, Enter key, and Power switch at the same time.
The unit is placed in standby mode for communications with the PC.
3
2
ON/OFF
OUTPUT SEL
ON/OFF OUTPUT VOLUME
INPUT VOLUME
POWER
UTILITY
ESC/BACK
MEMORY
ENTER
PARAMETER
8
7
6
5
4
3
2
1
INPUT SELECT
Input channel 8 selection key Power switchEnter key