10.4.2. Audio output setting items

Unless otherwise specified, use the Parameter setting knob for each parameter selection.

(B1) Output gain setting

O U T 1 – O U T 1

:O N 0.0

Select the output channel using the Output channel selection key. Confirm the selection by setting the Output channel ON/OFF key to ON. Set the output channel gain using the Output volume control.

Setting Range

Output Channel

OUT1 – 2, Max.8 when the 3 T-001Ts are used (default: OUT1)

 

 

Channel Control

ON (default), OFF

 

 

Channel Gain

, –70.0 dB to +10.0 dB (default: 0.0 dB), 0.5 dB steps

 

 

(B2) Output channel name setting

O U T 1 – _ _ _ _ _ _ _

The flashing portion is the cursor position for entering channel name characters.

Select a character from the alphanumeric character list by rotating the Parameter setting knob, then move the cursor with the Right shift key.

Entering a new name overwrites the existing name, if there is.

To delete the character, select [ _ ] (under-bar) with the Parameter setting knob. A space character cannot be entered.

Up to 7 characters can be used to set the name.

Even when an output channel name has been set, some setting screens display the channel number, not the set name.

When the output channel is stereo-linked (p. 56-C1),the name entry screen only for the odd channel is displayed.

Setting Range

7 characters (default setting: OUT1 – 8)

(B3) BASS and TREBLE settings

B A S S + 1 2 T R E B L E – 1 0

Rotate the Parameter setting knob to set gains.

Press the Right or Left shift key to select BASS or TREBLE, of which gain value that flashes can be adjusted.

Setting Range

–12 dB to +12 dB (default: 0 dB), 1 dB steps

(B4) Loudness compensation setting

L O U D N E S S – O N

Rotate the Parameter setting knob to set the loudness compensation function ON/OFF. Setting ON boosts low frequencies.

Setting Range

48

Page 48
Image 48
Vax M-9000 operating instructions T 1 O U T