Vax M-9000 operating instructions Setting the Scene Memory to be Recalled at Power-On

11.3. Setting the Scene Memory to be Recalled at Power-On

Step 1. Hold down the Memory key for 2 seconds or more. The Scene memory setting screen is displayed.

– – –

MEMORY 1

Step 2. Use the Parameter setting knob to display "P-ON" indication.

Step 3. Press the Enter key to display the setting screen for the Scene memory to be recalled at Power-On.

Step 4. Select with the Parameter setting knob the Scene memory bank number (01 – 32) or LAST STATE to be read at power-on.

Note

When the "LAST STATE" is selected, the unit is powered up to the state just before power-off when the power is switched on again.

Step 5. Press the Escape/Back key to perform setting that the designated Scene memory bank number is read at power-on.

Step 6. Press the Memory key.

The display returns to the normal use state.

Press for over 2 seconds.

S C E N E S E T T I N G S A V E

PARAMETER

2

S C E N E S E T T I N G P – O N

ENTER 3

P O W E R O N L A S T S T A T E

PARAMETER

4

P O W E R O N 0 1

ESC/BACK 5

S C E N E S E T T I N G P – O N

MEMORY 6

– – –

87