18.2. Installing the Software

Step 1. Load the supplied CD-ROM into the PC's CD-ROM drive.

Step 2. Double-click the "setup_a9k.exe" icon in the software folder.

Step 3. Designate the folder into which the 9000 series maintenance software is extracted, and click the "OK" button.

Note

After installation completion, only the software icon is created in the folder designated in the screen at right. The software execution file is moved into the automatically created C:/ProgramFiles/TOA folder after being extracted.

Step 4. After installation completion, confirm the "MaintCtrl.exe" icon is created in the folder designated in Step 3.

18.3. Connecting the Unit to the PC

Connect the unit's RS-232C port and the PC's RS-232C port with a 9-pin straight cable (male - female).

PC

RS-232C

9-pin straight cable (male – female)

109

Page 109
Image 109
Vax M-9000 operating instructions 109, Installing the Software, Connecting the Unit to the PC