10.3.2. Input setting items

Unless otherwise specified, use the Parameter setting knob for each parameter selection.

(A1) Input gain setting

I N 1 – I N 1

:O N 0.0

Select the input channel using the Input channel selection key. Confirm the selection by setting the Input channel ON/OFF key to ON. Set the input channel gain using the Input volume control.

Setting Range

Input Channel Selection

1 – 8 (default: 1)

 

 

Channel Control

ON (default), OFF

 

 

Channel Gain

, –70.0 dB to +10.0 dB (default: 0.0 dB), 0.5 dB steps

 

 

(A2) Input channel name setting

I N 1 – _ _ _ _ _ _ _

The flashing portion is the cursor position for entering channel name characters.

Select a character from the alphanumeric character list by rotating the Parameter setting knob, then move the cursor with the Right shift key.

Entering a new name overwrites the existing name, if there is.

To delete the character, select [ _ ] (under-bar) with the Parameter setting knob. A space character cannot be entered.

Up to 7 characters can be used to set the name.

Even when an input channel name has been set, some setting screens display the channel number, not the set name.

When an input channel is stereo-linked (p. 56-C1),the name entry screen only for the odd channel is displayed.

Setting Range

7 characters (default: IN1 – 8)

(A3) Phantom power ON/OFF setting

(when the D-001T is used or when the AN-001T is used and ANC operation is set to ACTIVE)

I N 1 – P H A N T O M – O F F

Set the Phantom power to ON or OFF.

The Phantom power cannot be set to ON for the stereo-linked input channel.

Setting Range

ON, OFF (default)

ON: Supplies the phantom power.

OFF: Does not supply the phantom power.

(A4) Input Sensitivity setting

(when the D-001T is used or when the AN-001T is used and ANC operation is set to ACTIVE)

I N 1 – S E N S I T I V I T Y – 1 0

Select the input sensitivity from the following 9 levels depending on the input sources:

Setting Range

–60, –54, –48, –42, –36, –30, –24, –18, –10 dB (default)

40

Page 40
Image 40
Vax M-9000 operating instructions Input setting items, A1 Input gain setting, 1 I N, A2 Input channel name setting