Vax M-9000 U T = 1 2 3 4 5 6 7 8 9 a B C, M O T E 1 V O L U M E, M O T E 1 O U T P U T

(C8) Control output terminal function display

C O U T 0 1 I N F - N O N E

Displays the function assigned to the control output terminal. The screen indications represent the following functions:

• NONE:	No function is assigned.
• POWER:	Power ON
• SCENE:	Scene memory recall
• CH ON:	Channel ON

•CH MUTE: Channel mute

•EMG MUTE: Emergency mute activation (All output channel mute)

• PG OUT: Paging activation

(C9) Control output terminal status display (when all are open)

C - O U T = _ _ _ _ _ _ _ _ _ _ _ _

(C9) Control output terminal status display (when all are closed)

C - O U T = 1 2 3 4 5 6 7 8 9 A B C

Status of all control output terminals can be confirmed on the screen, with the terminal Nos. 1 – 12 arranged in numerical order from left to right.

When closed, the terminal number is indicated by alpha-numerals. Alphabet A represents the terminal number 10, B represents 11, and C represents 12.

An open terminal is indicated by an underscore "_".

(C10) Remote controller type setting

R E M O T E 1 V O L U M E

Set the type of remote controller connected to the remote control input terminals.

Use the Left and Right shift keys to move the setting items on the screen.

Setting Range

Remote Volume Terminal Number	REMOTE 1, REMOTE 2
Controller type	OFF (default), VOLUME, ZM-9001, ZM-9002

• OFF: Select this setting when no remote controller is connected.

•VOLUME: Select this setting when a normal variable resistor or variable DC power supply unit is connected.

•ZM-9001: Select this setting when the ZM-9001 is connected. This setting adds 6 control inputs. These inputs are assigned the functions in the setting screens on p. 69-E1.

•ZM-9002: Select this setting when the ZM-9002 is connected. This setting adds 4 control inputs and 1 remote volume control. These inputs are assigned the functions in the setting screens on p. 69-E1.

(C11) Remote-controlled channel setting

(when the remote controller type is set to VOLUME or ZM-9002)

R E M O T E 1 O U T P U T 1

Select the input or output channel of which volume you want to remotely control by using the control input terminals on the rear panel or ZM-9002's volume control.

The REMOTE 1 on the screen represents the REMT VOL 1 of control input terminal, and the REMOTE 2 represents the REMT VOL 2.

Use the Left and Right shift keys to move the setting items on the screen.

Setting Range

Remote Volume Terminal Number	REMOTE 1, REMOTE 2
Remote-controlled channel	OFF, INPUT 1 – 8, OUTPUT 1 – 2,
	Max. OUTPUT 8 when T-001Ts are used
	(default for REMOTE 1: OUTPUT 1, REMOTE 2:
	OUTPUT 2)

58