Verizon MIFI4510LPP manual Common Problems and Solutions

Common Problems and Solutions

The following are some common troubleshooting solutions.

My MiFi 4510L just powered off without my pressing the power button. Why?

This may occur under any of the following circumstances:

•• Pressing the Master Reset button

•• Restarting the device

•• Switching profiles

•• Restoring the configuration settings

•• Battery depletion

To restore battery power, follow these steps:

➊➊Manually press the power button to turn it back on.

➋➋If the battery is depleted, charge the device using the wall charger.

How do I reset the MiFi 4510L device back to factory settings?

The master reset button is in a small hole located on the bottom of the device, underneath the battery cover. This button returns the device to factory settings, including re-setting the network name (SSID) and network key (Wi-Fi passkey) to those printed on the sticker affixed to the back of the device. (The original SSID and password also appear on the front of the Connect Card.) To reset the device, follow these steps:

➊➊Place one end of an unfolded paper clip into the master reset button hole.

➋➋Press the paper clip on the button until the LED blinks green one full blink plus a very brief blink (about five seconds).

70