USER ENGINEERING MODE (SIMPLE Only, Continued)
UNITS
P6 represents units, Metric or English. You can change this configuration for your Treadmill. When you enter P6, the large window shows the model number and the small window shows the units. An even number represents English units (miles/mph), and an odd number represents Metric units (kilometers/kph). You can change the number using either set of arrow keys. Press and hold ENTER to save the data.
MAXIMUM TIME
P7 represents the maximum time the treadmill can be used (shown as minutes:seconds). Use the number keys or the arrow keys to change the time. To save the time, hold down ENTER until there are two beeps.
DEFAULT WEIGHT
P8 represents the default weight. You can change this configuration for your Treadmill. To modify the weight, use the number keys or press the arrow keys. To save the new default weight, hold down ENTER until there are two beeps
G E N E R A L
ACCUMULATED TIME
P9 represents accumulated time in hours. This information is for viewing only; the data cannot be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, either in miles or kilometers. This information is for viewing only; the data cannot be modified.
PAUSE TIME
P14 represents the pause time. The default pause time is five minutes. You can modify the pause time from 20 seconds to 10 minutes. You can
44modify this time by using the number keys or the SPEED or ELEVATION arrows. Press and hold ENTER to save the new value.
