AUTO-CALIBRATION (DELUXE Only)
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION!
Auto-calibration is not represented by a Px designation. "Auto" appears in the center window. When you enter the function, "Auto" begins flashing. To begin auto-calibration, press START. The Treadmill will run through minimum and maximum speed and maximum incline; this will take three to five minutes. Let the treadmill perform this complete function before exiting the Engineering Mode.
Elevation A/D or Elevation in % appears in the left window. PWM value or Speed appears in the right window. "End" will appear in the center window when the auto-calibration is complete. When auto-calibration is complete, the treadmill will return to the start-up screen with P1 showing in the upper left window.
EXIT USER ENGINEERING MODE
P17 represents exit mode. When you press ENTER to select the function, the console performs a reboot, returning to program setup.
USER ENGINEERING MODE (SIMPLE Only)
Your Treadmill offers a User Engineering Mode that can access certain data and help to troubleshoot your Treadmill. The User Engineering Mode is designed for you to access functions that will not affect important Treadmill settings. To access this mode, please hold down the SPEED DOWN and ENTER keys while the Treadmill is at the start-up mode. When in User mode, “USEr” is displayed in the data window. Press ENTER. Use either set of arrow keys to access the available functions/data. Press ENTER to select the data/function. To save data, hold down ENTER until the Treadmill beeps. To exit, press STOP.
