10VISIONEER 6200/6400 SCANNER INSTALLATION GUIDE
The following diagram shows the 6200 scanner connected to a computer.
Power cord | USB cable |
Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the appropriate software from the CD to run the scanner.
When the software has finished loading, the Finish button on the dialog box becomes active.
7.Click the Finish button.
That completes the steps to connect your scanner to the computer.
8.Remove the CD from the computer and store it in a safe place.
9.Turn to “Checking Your Scanner” on page 15 to continue setting up your Visioneer scanner.
Note: The locking tab protects the scanner’s scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but always remember to unlock it before scanning. The scanner will not scan when locked.
