Visioneer Patriot 780 manual Editing or Deleting Scan Configurations

CONFIGURING THE ONETOUCH BUTTONS 75

EDITING OR DELETING SCAN CONFIGURATIONS

Note: Your scanner comes with a number of configurations pre-set at the factory. We recommend that you keep those configurations locked and do not edit or delete them. That way, you will always have the factory-settings available. If you do edit or delete them, and want to get the factory pre-sets back again, you will need to uninstall then re- install your scanner.

To edit or delete a scan configuration:

1.Open the OneTouch Properties window and make sure the Scan tab is selected.

2.Select the scan configuration you want to edit or delete.

Select the scan configuration to edit or delete. It must be unlocked, as indicated by not having a lock displayed here.

3. To delete the configuration, click the Delete button.

Note: If the Delete button is not available, the selected configuration is locked and cannot be deleted. You must first click the Edit button and unlock the configuration, as explained in the next steps.