Bluetooth setup, Add a cell phone, Next To base | VTech DS6472-6

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with your DS6472, you must first pair and connect your Bluetooth device(s) with the telephone base. All DS6472 handsets can be used to make or answer on the cell phone line.

Bluetooth wireless technology operates within a short range (30 feet). When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, move closer to the telephone base to maintain sufficient signal strength.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth devices. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices.

To pair and connect a cell phone:

Answering sys

Directory

1. Press

MENU

on the handset when it is not in use.

Caller ID log

2. Press

or

to highlight Bluetooth, then

Intercom

SELECT

press

.

Bluetooth

3. Press

SELECT

to choose Add device, then press

BACK

SELECT

SELECT

to choose Add cellular. The handset

displays

Please wait... followed by 1. If cell is

connected to BT device, please disconnect it.

BLUETOOTH

• If there are already four paired devices on the

Add device

Device list

device list, the 4th device on the device list will be

Download dir

automatically removed, regardless of whether the

Change PIN

new device pairing is successful or not (page 31).

BACK

SELECT

• If there are already two active devices on the device

list with prefix D1: or D2:, the handset shows Only

2 devices can be ready for connection. You are

ADD DEVICE

prompted to deactivate an active device.

Add cellular

Add headset

4. Press

NEXT

. The handset displays 2. Place cell

phone

next

to base.

• All devices that are connected to the telephone

BACK

SELECT

base are disconnected until the pairing process

is completed.

24

Image 29

VTech DS6472-6 user manual Bluetooth setup, Add a cell phone, To pair and connect a cell phone, Next To base

Contents

User’s manual Congratulations Table of contents Multiple handset use Answering system settingsDirectory Caller ID Index 129 Answering system OperationAppendix Getting started Parts checklist Avoid placing the telephone base too close to Installation Telephone base and charger installation Charge light Handset battery installation Handset X at least Handset battery chargingLow battery Headset charging Headset charger installationPower on the headset To attach the earbud to the headset earpiece Earbud installationTo remove the earbud from the headset earpiece To attach the ear hook to the headset Ear hook installation To wear the headset on your left ear To remove the ear hook from the headset To attach the head band to the headset Head band installation To remove the head band from the headset Tabletop to wall mount installation Installation options See Telephone base and charger installation on Wall mount to tabletop installation USE light Telephone base layoutMessage window VOL Softkeys Handset layout MUTE/DELETE Push to Talk PTT Headset layout Reset inset buttonOn/off Earpiece Rotating clip Answering sys record memos Handset main menuTo enter the main menu Website displays the VTech website address Introducing Bluetooth Bluetooth Glossary of terms Add a cell phone Bluetooth setupTo pair and connect a cell phone Devices can be ready for connection. You are To search base VTech DS6472 discoverable PIN If you have trouble pairing your cell phone, it may notTo device list Displays Cell Phone a is added and connected To pair and connect a headset Add a headset Auto connection Review the device list Connecting devicesConnect/Disconnect an active device To highlight Connect/Disconnect YES Remove a device Rename a device To replace an active device Bluetooth connection from idle modeReplace an active device Download directory Directory? Press Erasing directoryHandset displays Memory is full. Replace existing View the directory download information Interruption to directory download To change the PIN Change PIN Handset settings Ringers Telephone settingsRinger volume handset Ringer volume headset To highlight All lines, Home, Cell-D1 or Ringer toneTo select a ringer tone To set the date and time manually Set date and time LCD language SettingsVoice language To select a language Display alerts Missed call indicatorTo reset the missed call indicator To reset the voicemail indicators Voicemail indicators No line To reset the download fail indicationTo turn the no line alert on or off Download fail CID time synchronization To change the settingRename handsets To rename a handset Key tone Dial mode Save. You hear a confirmation tone Voice Announce caller ID Digits Dialing from Caller ID log WebsiteHome area code Cell area code Answering system settings Telephone base settingsTelephone base ringer volume Setting Make, answer or end a home call Telephone operation Call waiting on the home line To transfer a call from a handset to a Bluetooth headsetTo transfer a call from the headset back to the handset To end a call that started at the handset Call waiting on the cell line Make, answer or end a cell callTo make a cell call 1. Press /CELL To answer a cell call Answer a home call while on a cell call Answer a cell call while on a home callCell phone voicemail Conference home and cell calls Using the home and cell lines togetherTo conference both home and cell calls To end a conference call Handset speakerphone Volume controlSilence the ringer Mute Handset/headset locator Temporary tone dialingHold Transfer a call Equalizer To access a number in the caller ID log while on a call To access a number in the directory while on a callTo access the redial list while on a call Chain dialing Dial a redial entry Redial listReview the redial list Delete a redial entry Save a redial entry to the directory Share an outside call Multiple handset useIntercom While on a call To answer an intercom call at the destination handset Answer an incoming call during an intercom callTo silence an intercom call To end an intercom call Rings and displays Other handset is calling Transfer a call using intercom To turn PTT on or off Push-to-talk PTTPTT on/off PTT to a single handset Or Push to Talk PTT to multiple handsetsAll handsets then press Change a one-to-one PTT to intercom call Answer a PTT call Answer an incoming call during a PTT call End a PTT callMake an outgoing call during a PTT call To end or leave a PTT call About the directory Directory Create a new entry in the home directory Character alphabetical search Review the directoryTo review the directory To start a search To dial a directory entry Dial a directory entryEdit a directory entry Delete a directory entry Edit the type of a directory entryRemove a downloaded directory If you only want to edit the type of a directory entry Assign a speed dial slot Speed dialReassign a speed dial slot Dial a speed dial entry Delete a speed dial entry Information about caller ID with call waiting Caller IDAbout caller ID Memory match Caller ID history Review the caller ID log Dial a caller ID log entry View dialing options Save a caller ID log entry to the directory Caller ID log display screen messages Delete from the caller ID logTo delete a single entry To delete all entries Answer on/off Answering system settingsUsing a handset Record your own announcement AnnouncementPlay your announcement Delete your announcement Call screening Answering system setup Number of rings Remote access code Recording time Message alert tone Using the answering system and voicemail together Answering system and voicemail indicatorsAnswering system operation To play messages with a handset on Voice prompts Message capacityCall intercept Call screening at the telephone base To play messages with the telephone base Temporarily turning off the message alert toneMessage playback No caller info To play messages with a handset To record a memo Delete all old messagesRecord and play memos Window display Description Message window displays Command Function Remote access Display screen messages Appendix Unsuccessful connection between a Bluetooth One handset is receiving an outside call There are no entries found when you PTT session is ended D1/D2 Handset and telephone base indicators Handset lightsTelephone base lights New answering system message indicates you have Bluetooth connected devices indicates that there areHandset icons Headset lights Headset indicatorsHeadset alert tones Operation Operating time Handset batteryBattery needs charging when Conserve battery life Headset battery To register a handset Expand your telephone systemAdd and register a handset To register a headset Add and register a headset To deregister all handsets Deregister handsets/headsetsTo reset Cannot add my Bluetooth headset to the telephone base TroubleshootingCannot connect my Bluetooth headset with the telephone base Cannot add my cell phone to the telephone base Bluetooth system busy appears on the display Cannot put my Bluetooth headset in discoverable modeCannot find VTech DS6472 on my cell phone My cell phone disconnects with the telephone base PIN on the telephone base does not work Listening volume of my cell call is too loud or quietCannot download contacts from my cell phone to the DS6472 See duplicate entries in my downloaded directory Charge light is off Low battery shows on screenMy telephone does not work at all Cannot dial out Telephone does not ring when there is an incoming callThere is no dial tone My handset beeps and is not performing normally Hear other calls when using the cordless handset/headset Registration failed appears on the handset Hear noise on the cordless handset and the keys do not workMy headset does not work at all Cannot dial out from my cordless headset My cordless headset is not performing normally Headset does not charge in the headset chargerLight on the headset is off while charging Cannot register a cordless headset Caller ID entries do not match the numbers I need to dial My caller ID features are not working properlyOut of range or No power at base shows on the handset Cannot retrieve my voicemail messages New voicemail appear on the handsets and I don’t know whyOutgoing announcement is not clear Messages on the answering system are very difficult to hear Messages on the answering system are incomplete Answering system does not respond to remote commandsAnswering system does not record messages Common cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersMaintenance Rbrc seal About cordless telephones What does this limited warranty cover? Limited warranty 125 FCC Part 68 and Acta FCC, Acta and IC regulationsFCC Part Industry Canada Technical specifications Index 130 131