![](/images/new-backgrounds/1310086/310086139x1.webp)
Multiple handset use
PTT to multiple handsets
When there are multiple handsets registered to the telephone system, PTT supports
1.To begin a PTT call to multiple handsets:
•Press and hold PUSH TO TALK when the handset is not in use.
•If you have three or more handsets, press PUSH TO TALK when the
handset is not in use. Press | and #, or press or | to highlight | |
All handsets then press | SELECT | or PUSH TO TALK. |
|
Your handset displays Connecting to all handsets... for a few seconds. When the connection is made, both your and the destination handsets display Press and hold [PTT] to talk and beep once.
2.Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak towards the handset. Your voice is broadcast to the destination handset.
While you are speaking, the handset displays PTT To handset: X (X represents the destination handset; a maximum of four handset numbers appear).
3.Release PUSH TO TALK after speaking. All eligible handsets beep once again. After the handsets beep, you can press and hold PUSH TO TALK to continue speaking or the destination handsets can respond (see Answer a PTT call on page 66).
4.Press OFF/CANCEL or END to end the PTT call. The handset displays Push to talk Ended for a few seconds.
- OR -
Place the handset in the telephone base or charger to end the PTT call.
After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call
ends automatically.
65