Xerox 4650, 4450 manual Sample .FSL, Placing a graphic, Syntax Begin Section id, END Section

FORMS DESCRIPTION LANGUAGE

n/d

Specifies the reference scale factor. Each parameter, n and d, must be an integer in the range of 1 to 8 to allow a reference scale factor in the range of 1/8 to 8. The reference scale factor is multiplied by that specified at the time the graphic was digitized, and the product is rounded to the nearest integer in the range of 1 to 8. That integer becomes the effective scale factor with which the graphic is imaged.

Default	If no unit is specified, grid unit dimensions are used as the
	default.
Example	GRAPHIC AFJ AT 10, 12;
Sample .FSL	A GRAPHIC command is illustrated in figure 2-6.
	Figure 2-6.	Placing a graphic
	AT 31.6,31.6 DRAW BOX 46.8 WIDE BY 21.8 HIGH
	USING SOLID 2;
	AT 31.9, 31.9 DRAW BOX 46.2 WIDE BY 21.2 HIGH
	USING SOLID 2;
	AT 32.2,32.2 DRAW BOX 45.6 WIDE BY 20.6 HIGH
	USING SOLID 2;
	GRAPHIC UNICRN AT 31.5,42;
	TEXT USING FONT 1 AT 83.5,2.5©FORM SM105©;
Considerations	Up to 16 images per page are permitted. The Raster Image
	Processor (RIP), Interpress, and graphics capability (GVG2),
	enable the printing of more than 16 images per page as well as
	vector graphics.
		SECTION
	When a form consists of several identical sections, you can save
	time by defining only one section and treating it as a module,
	that is, having it repeated at desired locations.
Syntax	BEGIN SECTION id;
	or
	DO SECTION id AT y unit x unit;
	END SECTION;
Parameter options	id
	An identifier (one to six characters) that is invoked when a
	section is to be defined.

y

Coordinate of the origin on the y axis of the section in relation to the origin of the form.

unit

Unit of linear measurement, expressed as inches (IN), centimeters (CM), or DOTS. If units are not specified, the measurement is in grid units.

XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE 2-19