Xerox 4450, 4650 manual Drawing boxes, Placing text at a location

SAMPLE FORM CREATION

Drawing boxes

Use the BOX command to construct individual, standalone boxes or boxes that share common sides. You can also create a shaded area or construct an invisible box to place ªfloatingº text such as titles conveniently.

Enter the following COMMENT and BOX command, as shown in figure C-6.

Figure C-6. BOX command

COMMENT *** DRAW BOXES ***;

AT 2,2 DRAW BOX 35 WIDE BY 2 HIGH USI HAIRLINE;

AT 2,82 DRAW BOX 50 WIDE BY 2 HIGH USI HAI;

AT 5,0 DRAW BOX 132 WIDE BY 56 HIGH USI HAI;

AT 5.1,0 BOX 132 WIDE BY 1.8 HIGH USI SHADING;

AT 10.1,0 DRAW 9 BOXES 132 WIDE BY 2.8 HIGH USI SOL HAI

INK ©BLUE© AND FILL USING INK ©XEROX.PICTORIAL.PALE BLUE©

AND REPEAT VER EVE 6;

Placing text at a location

Use the TEXT AT command to place text at an exact location.

Enter the COMMENT and TEXT AT command, as shown in figure

C-7.

Figure C-7.TEXT AT command

COMMENT *** TEXT AT COMMAND ***;

TEXT USING FONT 2 AT 2,2.5 ©COMP.©;

TEXT USING FONT 2 AT 2,11 ©BR.©;

TEXT USING FONT 2 AT 2,14 ©DEPT.©;

TEXT USING FONT 2 AT 2,22 ©DATE©;

TEXT USING FONT 2 AT 2,30 ©PP©;

TEXT USING FONT 2 AT 2,34 ©PAGE©;

TEXT USING FONT 1 INK ©BLUE© AT 3,47 ©EARNINGS REGISTER©;

TEXT USING FONT 2 AT 61,0 ©7860-143-1©;

VER TEXT USING FONT 3 AT 66,-5 ©F8662©;

C-4 XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE