Yamaha 02R SELECTED CHANNEL Controls

User Interface 23
Digital Recording Console 02R User’s Guide
SELECTED CHANNEL Controls
These controls are very similar in setup to the controls of an analog mixer.
You may find working with the buttons and controls of this section of the
02R is much faster and more intuitive than working through the screens of
the DISPLAY ACCESS functions.
ROUTING buttons
The routing buttons allow you to directly select the destination for the
selected channel. The LEDs in the buttons illuminate to indicate the status
of the channel.
AUX controls
The AUX buttons allow you to select the auxiliary busses you want to send
the selected channel signal to. The SEND LEVEL rotary encoder is used to
set the level – indicated by the adjacent LED bargraph. The [ON] button is
used to turn the send on or off. This allows you to make quick A-B
comparisons.
Note: You can customize your 02R so that when you adjust any of the controls
in this group, the display switches to the ROUTING display function. See
“Preferences” on page 162 of the User’s Guide.
ROUTING
2
4
6
8
1
3
5
7
DIRECTST
SEND LEVEL
AUX
AUX 2
AUX 4
AUX 6
AUX 8
EFF2
AUX 1
AUX 3
AUX 5
AUX 7
EFF1
ON