Yamaha 02R Mixing and Automation 83

Mixing and Automation 83
Digital Recording Console 02R Getting Started Guide
This display consists of a table listing Time Code, Channel, and ON/OFF of
the channel on/off events recorded into the current automix. It also has two
control icons which allow you to insert (INSERT) or delete (DELETE)
events.
2. Use the CURSOR buttons to select an event to edit.
The CURSOR buttons allow you to select the individual events (the
selected event is called the “current event”) and to move across the table
entry for each event. You can edit the following data:
•Time Code – the location of the event as a timecode value. The 02R
sorts events by their timecode value.
•Channel – the channel that the on/off event applies to.
•ON/OFF – the ON or OFF status of the channel.
3. Rotate the encoder wheel to change the value at the current
cursor location.
4. Use the CURSOR buttons to select the INSERT icon and press the
[ENTER] button to insert an event.
A new event that is an exact duplicate of the current event will be inserted
in the table. Use the CURSOR buttons to select the new event and adjust its
values to suit. If you change its timecode value, the new event will be
moved to its proper location in the time sequence.
5. Use the CURSOR buttons to select the DELETE icon and press
[ENTER] to delete the current event.
Note: If the cursor is anywhere on the screen other than over the INSERT or
DELETE icons, pressing the [ENTER] button will cause the cursor to move over
the DELETE icon.