Yamaha 02R 32 Introductory Recording Tutorial, Undoing a Recall, Storing an EQ Program

32 Introductory Recording Tutorial
Digital Recording Console 02R Getting Started Guide
Undoing a Recall
If you decided you did not want to replace the current equalization curve
with the program you selected from the EQ library, you can recall the
previous curve.
1. Use the CURSOR buttons to select the RECALL icon and rotate the
encoder wheel until program “U” is highlighted.
Program “U” is the UNDO buffer. It always contains the last curve that was
applied to a channel.
2. Use the CURSOR buttons to select the RECALL icon and press
[ENTER].
The original equalization curve is recalled.
Storing an EQ Program
Before you store an equalization curve, you need to create it using the
EQUALIZER display function. Set the EQ parameters as detailed in the
steps starting from “Setting the Gain” on page 25 of the Getting Started
Guide.
1. Select the LIB icon with the CURSOR buttons and press the [ENTER]
button.
It is still faster to select the EQUALIZER Library display function by
pressing the [EQ] button again.
The EQUALIZER Library display function appears on the screen with your
new equalization curve at the top of the display.
Note: The curve you first recalled and then used UNDO to replace is now itself
in the UNDO buffer.