Mixing and Automation 85
Digital Recording Console 02R Getting Started Guide
4. Select the “Parameters” to delete with the CURSOR buttons and
press the [ENTER] button to switch a parameter on or off.
You can select one or more parameters to delete from the following:
•LEVEL – fader/encoder events, controlling the input level of a channel.
•CH ON – channel on/off events.
•PAN – pan operation events of a channel.
•EQ – equalization operation events of a channel.
•AUX1 through AUX8 – fader/encoder events, controlling the auxiliary
send level of a channel.
If you double-click the [ENTER] button on an event type, that event type
will be turned on and all the other types turned off,or all event types will be
turned on.The 02R displays a confirmation popup which allows you to
select one channel or all channels:
Use the CURSOR buttons to select “ONE” to turn one event type on and all
the other types turned off, or select “ALL” to turn all the event types on.
Press the [ENTER] button to execute your choice.
5. Use the CURSOR buttons to select the “In Time” and rotate the
encoder wheel to specify the timecode location at which to
begin deleting events.
You can independently adjust the timecode hours, minutes, seconds, and
frames values.
6. Select the “Out Time” with the CURSOR buttons and rotate the
encoder wheel to specify the timecode location at which to stop
deleting events.
The 02R will delete all the specified events starting from the “In Time”
timecode location up to, but not including, events at the “Out Time”
timecode location.
7. Use the CURSOR buttons to select the “EXTRACT” control icon and
press the [ENTER] button.
The specified events will be removed from the current automix from the
starting timecode location up to the stopping timecode location.
8. If you decide you did not want to delete the events just removed
from the current automix, you can use the CURSOR buttons to
select the “UNDO” control icon and press the [ENTER] button.
Be aware that you can only UNDO the last delete operation you
performed!