Installing Options 179

Digital Recording Console 02R User’s Guide
Digital I/O Card AES/EBU (CD8-AE/CD8-AE-S)
The AES/EBU digital I/O cards (CD8-AE/CD8-AE-S) are used to connect
AES/EBU compatible multitrack digital recorders or other similar digital
devices to the 02R.

Installing the CD8-AE/CD8-AE-S

The CD8-AE card is a double slot card (see “Double Slot Cards” on page
176). The CD8-AE-S card is a single slot card (see “Single Slot Cards” on
page 175).
1. Connect the AES/EBU compatible multitrack digital recorder to
the 02R using the appropriate connectors.
Use high quality 110 digital connecting cables to connect to the
CD8-AE card. Use 25-pin D-SUB cables that are suitable for digital
audio use to connect to the CD8-AE-S card.
2. If your AES/EBU compatible multitrack digital recorder has a
dedicated wordclock output connector, plug it into the WORD
CLOCK IN connector on the back of the 02R and turn the 75
terminator switch on.
If there is no dedicated wordclock output, you can obtain the
wordclock signal required from one of the digital interconnect lines.
Note: A dedicated wordclock line will give you the best wordclock
synchronization results.
BNC 75 cable
SLOT 1
CD8-AE
AES/EBU
OUT
AES/EBU
OUT
AES/EBU
IN
AES/EBU
IN
WORD
CLOCK
OUT
WORD
CLOCK
IN
XLR cable x 4
XLR cable x 4
Digital MTR
This illustration shows how to
connect to a CD8-AE card.
For the CD8-AE-S card, 25-pin
D-SUB cables are used instead
of the XLR cables.