Internal Effects 103
Digital Recording Console 02R User’s Guide
Program 16 — FLANGE–>REVERB1
Flange effect followed by reverb. This effect is more appropriate to emphasize modulation effects than the
CHORUS–>REVERB program. Use the reverb Depth parameter to adjust the amount of reverberation.
Parameter Setting Range Description
Freq. 2.4Hz 0.1~40.0Hz Flange modulation frequency.
Depth 68% 0~100% Flange depth. The amount of modulation.
FB.Gain +37% –99 ~ +99% Feedback gain. The amount of signal returned to the flanger.
Mod.Dly 254.4ms 0.0~255.0ms Flange delay. The delay time before modulation begins.
Rev.Time 2.6s 0.3~30.0s Reverb time.
Diff. 8 0~10 Reverb diffusion.
Ini.Dly 10.0ms 0.1~200.0ms Initial delay between the direct sound and early reflections.
LPF 9.0KHz 1.0kHz~THRU Low pass filter cutoff frequency.
HPF 45Hz THRU~8.0kHz High pass filter cutoff frequency.
Depth 61% 0~100% Reverb depth. The amount of reverb.
Program 17 — FLANGE–>REVERB2
This is a variation of program 16.
Parameter Setting Range Description
Freq. 3.3Hz
Same as program 16 Same as program 16
Depth 9%
FB.Gain –63%
Mod.Dly 0.4ms
Rev.Time 1.4s
Diff. 8
Ini.Dly 9.1ms
LPF 9.0KHz
HPF 45Hz
Depth 56%
Program 18 — EARLY REF.1
Simulates early reflections only. It can create a wide range of effects , from gate-reverb to ambience effects.
Parameter Setting Range Description
Type L-Hall ER type Choose S-Hall, L-Hall, Random, Reverse, Plate, or Spring.
RoomSize 2.5 0.1~20.0 Time interval between the early reflections.
Liveness 2 0~10 Rate at which reflected sounds fade or decay.
Diff. 8 0~10 Reverb diffusion.
Ini.Dly 23.7ms 0.1~200.0ms Initial delay between the direct sound and early reflections.
ER Num. 15 1~15 Number of early reflections.
Hi.Ratio 0.8 0.1~1.0 High frequency decay ratio.
FB.Gain 0% –99 ~ +99% Feedback gain. The amount of signal returned to the effect.
LPF 10.0kHz 1.0kHz~THRU Low pass filter cutoff frequency.
HPF THRU THRU~8.0kHz High pass filter cutoff frequency.