180 Installing Options
Digital Recording Console 02R User’s Guide
Wordclock Selection
1. Power on your AES/EBU compatible multitrack digital recorder
and then the 02R.
It is always important to observe the correct order for powering up
equipment in a studio. Start with the AES/EBU compatible multitrack
and mastering recorders and the signal processors, then the 02R, and
finally the monitoring amplifiers and other downstream gear.
2. Press the [DIGITAL I/O] button until the “Word Clock Select”
screen appears.
If the card was installed properly, the system software should correctly
identify it in the appropriate slot.
3. Use the CURSOR buttons to select the wordclock source.
If your AES/EBU compatible multitrack digital recorder has a
dedicated wordclock output connector, use the CURSOR buttons to
select the W.CLK IN box and press the [ENTER] button. If the
multitrack digital recorder does not have a dedicated wordclock
output, select the TAPE 1/2 box – the first box in the SLOT1 row – and
press the [ENTER] button.
4. When you select the wordclock source, the appropriate icon
should be inverted in reverse video.
See “Word Clock Select” on page 154 of the User’s Guide for further
details.