202 Specifications

Digital Recording Console 02R User’s Guide
Options

AD/DA I/O Card Specifications

Analog Input
Analog Output

Digital I/O Card Specifications

Digital Input/Output
Input
connections GAIN Actual load
impedance
For use
with nom-
inal
Input level Mixer
connector
Sensitivity*1
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23V) or the nominal output level when the unit
is set to maximum gain. (All faders and level controls are maximum position.)
Nominal Max.
before clip
INPUT 1
through 8
+4
10kΩ600Ω lines
–6 dB
(388mV) +4 dB
(1.23mV) +24 dB
(12.3mV) Phone Jack
(TRS)*2
*2 CH INPUT phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
✳In these specifications, when dB represents are specific voltage, 0 dB is referenced to 0.775 volts RMS.
✳In these specifications, when dBV represents are specific voltage, 0 dBV is referenced to 1 volts RMS.
–10 –20 dBV
(100mV) –10 dBV
(316mV) +10 dBV
(3.16V)
Output connections GAIN Actual source
impedance
For use
with nom-
inal
Output level
Mixer connector
Nominal Max be-
fore clip
OUTPUT 1 through 8
+4
150Ω10kΩ lines
+4 dB
(1.23mV) +24 dB
(12.3mV) Phone Jack
(TRS)*1
*1 CH OUTPUT phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
✳In these specifications, when dB represents are specific voltage, 0 dB is referenced to 0.775 volts RMS.
✳In these specifications, when dBV represents are specific voltage, 0 dBV is referenced to 1 volts RMS.
–10 –10 dBV
(316mV) +10 dBV
(3.16V)
Input/Output Format Level Mixer connector
DA88/DA38 (BUS/DIRECT OUT, TAPE IN) TDIF-1 C-MOS D-SUB 25PIN
ADAT (BUS/DIRECT OUT, TAPE IN) ADAT OPTICAL
AES/EBU (BUS/DIRECT OUT, TAPE IN) AES/EBU RS422
XLR-3-31 type (INPUT)
XLR-3-32 type (OUTPUT)
D-SUB 25PIN
YAMAHA (BUS/DIRECT OUT, TAPE IN) YAMAHA RS422 D-SUB 25PIN
CASCADE (BUS/DIRECT OUT, TAPE IN) YAMAHA RS422 D-SUB 25PIN