Yamaha 02R MIDI Data Format

206 Specifications

Digital Recording Console 02R User’s Guide

Speciﬁcations

MIDI Data Format

1. General remarks

1-1 This section describes the MIDI functionality of the 02R.

1-2 Electrical characteristics and message formats are in compliance with MIDI standard 1.0.

2. Messages transmitted and received

2-1. Program change

Transmission/reception can be turned ON or OFF using the “MIDI Setup” display function (see “Setup” on

page 143 of the User’s Guide).

When a memory recall occurs, the program change corresponding to that memory number will be

transmitted on the speciﬁed MIDI channel.

When a program change is received on the speciﬁed MIDI channel or in OMNI mode, the memory

corresponding to that program number will be recalled.

The user can create a customized program change assign table (see “Program Change Assign” on page 144 of

the User’s Guide).

2-2. System exclusive messages

System exclusive messages include Bulk Dump/Request and Parameter Change/Request. For these

messages, the device number will be the same as the MIDI channel.

BULK DUMP/REQUEST

Transmission and reception is always ON.

Bulk Request is transmitted using the “MIDI Bulk Dump & Request” display function (see “Bulk

Dump/Request” on page 145 of the User’s Guide) on the speciﬁed MIDI channel.

Bulk Dump transmits the contents of the corresponding memory on the speciﬁed MIDI channel, and is

transmitted either by operations in the “MIDI Bulk Dump & Request” display function, or when a Bulk

Request is received on the speciﬁed MIDI channel.

When a Bulk Dump is received, the contents of the corresponding memory will change.

PARAMETER CHANGE/REQUEST

Transmission/reception can be turned ON or OFF using the “MIDI Setup” display function (see “Setup” on

page 143 of the User’s Guide).

If parameter change transmission is ON, a message will be transmitted on the speciﬁed MIDI channel when

the parameters of the 02R are modiﬁed.

Contents

Main FCC INFORMATION (U.S.A.) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord i Important Information ii iii Maintenance Page Page Contents Page Introduction to the 02R 2 Crystal Clarity and Unsurpassed Audio Quality Dynamic Automation with Total and Instant Recall Digital Recording Console 02R 3 Automation System Where to Start User Guides Installation Top and Rear Panels 23/24 21/22 19/20 17/18 Features 6 Optional Features 7 Key Features 8 User Interface Large Graphical Display Page 10 Digital Benefits Parametric EQ with Library Page Page Getting Started 14 Getting Started Basic Assumptions What You Will Need Making the Connections Page 16 Getting Started Power ON/OFF Power ON Power OFF Setting the Synchronization Getting Started 17 Recall Scene Memory 0 Page Introductory Recording Tutorial 19 Introductory Recording Tutorial 20 Introductory Recording Tutorial Setting the Input Level Setting Fader Levels Selecting a Monitor Source Introductory Recording Tutorial 21 Setting the GAIN 22 Introductory Recording Tutorial /ATT Display Function Peak Hold Introductory Recording Tutorial 23 Channel ON/OFF SCENE MEMORY LED 24 Introductory Recording Tutorial Applying EQ Turning the Equalizer ON/OFF Introductory Recording Tutorial 25 Setting the Gain 26 Introductory Recording Tutorial Introductory Recording Tutorial 27 Setting the Frequency 28 Introductory Recording Tutorial Setting the Bandwidth Page 30 Introductory Recording Tutorial Using the EQUALIZER Library Recalling an EQ Program Introductory Recording Tutorial 31 32 Introductory Recording Tutorial Undoing a Recall Storing an EQ Program Introductory Recording Tutorial 33 34 Introductory Recording Tutorial Introductory Recording Tutorial 35 Routing 36 Introductory Recording Tutorial Using the ROUTING Display Function Introductory Recording Tutorial 37 Selecting the Routing 38 Introductory Recording Tutorial Panning Adjusting the Pan Introductory Recording Tutorial 39 Pairing Channels Page Secondary Recording Tutorial 41 Secondary Recording Tutorial 42 Secondary Recording Tutorial Auxiliary Send Channels Secondary Recording Tutorial 43 Setting the Auxiliary Send Level 44 Secondary Recording Tutorial Secondary Recording Tutorial 45 Creating a Monitor Mix Monitor Mix Process 46 Secondary Recording Tutorial Applying Effects Setting the Send Levels Secondary Recording Tutorial 47 Adjusting the Effect Return 48 Secondary Recording Tutorial Secondary Recording Tutorial 49 Recalling and Editing Effects Recalling Effects Programs 50 Secondary Recording Tutorial Editing Effects Secondary Recording Tutorial 51 Storing a User Effect 52 Secondary Recording Tutorial Secondary Recording Tutorial 53 54 Secondary Recording Tutorial Patching in a Dynamics Processor Compressor Expander Compander Gate and Ducking Secondary Recording Tutorial 55 Compressing the Stereo Output 56 Secondary Recording Tutorial Secondary Recording Tutorial 57 Using the Dynamics Library Recalling Dynamics Programs 58 Secondary Recording Tutorial Editing Dynamics Programs Secondary Recording Tutorial 59 Storing a User Dynamics Program 60 Secondary Recording Tutorial Secondary Recording Tutorial 61 62 Secondary Recording Tutorial Scene Memories Storing a Scene Memory Secondary Recording Tutorial 63 Naming a Scene Memory 64 Secondary Recording Tutorial Secondary Recording Tutorial 65 Recalling a Scene Memory Page Mixing and Automation 67 Mixing and Automation 68 Mixing and Automation What is 02R Automation? Automix Memory Mixing and Automation 69 Real-Time Automation Basic Connections and Setup 70 Mixing and Automation Mixing and Automation 71 Creating a New Automix 72 Mixing and Automation Mixing and Automation 73 Recording the First Session 74 Mixing and Automation Automix Recording Notes Mixing and Automation 75 76 Mixing and Automation Editing Automation Events Overwriting Events Mixing and Automation 77 Punch-in Automix Data 78 Mixing and Automation Editing Fader/Encoder Movements Mixing and Automation 79 80 Mixing and Automation Mixing and Automation 81 Off-Line Automix Editing Editing Scene and Library Recall 82 Mixing and Automation Editing Channel ON/OFF Mixing and Automation 83 84 Mixing and Automation Deleting Events Mixing and Automation 85 86 Mixing and Automation Using the AUTOMIX Library Storing an Automix Mixing and Automation 87 Automix Memory 88 Mixing and Automation Mixing and Automation 89 Recalling an Automix 90 Index Index Index 91 C D E 92 Index F I M O Index 93 R Page Page Sections Page Contents iii Contents 1 Controls and Connections. . . . . . . . . . . . . . . . . . . 1 2 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3Mixing and Monitoring. . . . . . . . . . . . . . . . . . . . . 25 4MIXING Display Functions . . . . . . . . . . . . . . . . . . 31 iv Contents 5 Dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 6 Auxiliary Channels. . . . . . . . . . . . . . . . . . . . . . . . 83 7 Internal Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Contents v 8 Scene Memories. . . . . . . . . . . . . . . . . . . . . . . . . 113 9 Automation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 10 MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 11 Groups and Pairs . . . . . . . . . . . . . . . . . . . . . . . . 147 vi Contents 13 Installing Options . . . . . . . . . . . . . . . . . . . . . . . . 171 14 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 15 Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Page 2Controls and Connections Front Panel Controls and Connections 3 Analog input controls 1. Phantom switches (channels 1 to 8) 2. A/B switches (channels 1 to 8) 3. 20dB (pad) switches (channels 1 to 16) 4Controls and Connections Analog output controls 0 B 9 Controls and Connections 5 11. MIXING buttons 12. AUX buttons 6Controls and Connections Display screen and related controls H 13. SCENE MEMORY indicator 14. FADER STATUS indicators Controls and Connections 7 SELECTED CHANNEL controls EQUALIZER AUX 19. ROUTING buttons 8Controls and Connections Monitor controls 23. STUDIO buttons 24. CONTROL ROOM buttons 25. TALKBACK buttons Controls and Connections 9 Faders 14 15 16 Page Controls and Connections 11 38. CURSOR buttons DF 39 0AB C E Rear Panel 1. STUDIO MONITOR OUT connectors 2. AUX SEND connectors 3. C-R MONITOR OUT connectors 245 6 7 8 12 Controls and Connections 4. STEREO OUT ANALOG (1 and 2) connectors 5. 2TR IN ANALOG (1 and 2) connectors 6. Stereo input channels (17 to 24) 7. Input channels (9 to 16) Controls and Connections 13 14 Controls and Connections 17. Option slots (1 to 4) List of Cards Block Diagram Page User Interface 17 User Interface 18 User Interface About the User Interface DISPLAY ACCESS Buttons CONFIGURATION group User Interface 19 MIXING group AUX group 20 User Interface Display CURSOR Buttons User Interface 21 Encoder Wheel ENTER Button SCENE MEMORY Buttons 22 User Interface Display Functions User Interface 23 SELECTED CHANNEL Controls ROUTING buttons AUX controls 24 User Interface PAN controls EQUALIZER controls Mixing and Monitoring 25 Mixing and Monitoring 26 Mixing and Monitoring Analog Inputs Phantom Power Mixing and Monitoring 27 Pad GAIN Controls SEL Buttons 28 Mixing and Monitoring ON Buttons Faders Rotary Encoders FLIP Button Mixing and Monitoring 29 Analog Outputs Monitor Selector Switches STUDIO Buttons CONTROL ROOM Buttons 30 Mixing and Monitoring Monitor Level Controls C-R LEVEL Control T/B LEVEL Control STUDIO LEVEL Control PHONES LEVEL Control MIXING Display Functions 32 MIXING Display Functions Phase and Attenuation Phase Attenuation Page 34 MIXING Display Functions Delay Delay and Cascade MIXING Display Functions 35 Fine-Tuning the Delay 36 MIXING Display Functions Pan and Balance MIXING Display Functions 37 Pan Positions Stereo-Pair Pans Stereo Width 38 MIXING Display Functions PAN controls MIXING Display Functions 39 Routing Direct Outputs 40 MIXING Display Functions ROUTING buttons MIXING Display Functions 41 Metering 42 MIXING Display Functions Peak Hold Meter Source Points Setting the Bus Levels MIXING Display Functions 43 Optional Meter Bridge MB02 44 MIXING Display Functions View Phase/Attenuation Pan MIXING Display Functions 45 Pair Routing Delay Meter Source Point 46 MIXING Display Functions Auxiliary Sends Equalizer Dynamics Library Channel Library Storing Channel Recalling Channel 48 MIXING Display Functions UNDO Operation Program Name MIXING Display Functions 49 Equalizer 50 MIXING Display Functions Equalization parameters: MIXING Display Functions 51 EQUALIZER controls Reset the Gain Reset the Equalizer 52 MIXING Display Functions Equalizer Programs MIXING Display Functions 53 Equalizer Library Recalling EQ Programs Storing EQ Programs 54 MIXING Display Functions Page 56 MIXING Display Functions Preset EQ Program Parameters MIXING Display Functions 57 10 19 18 17 58 MIXING Display Functions MIXING Display Functions 59 60 MIXING Display Functions Dynamics 61 Dynamics 62 Dynamics Dynamics Processors Preset Dynamics Programs Dynamics 63 Compressor Compressor (CMP) parameters: 64 Dynamics Dynamics 65 Expander Expander (EXP) parameters: 66 Dynamics Compander CompanderH (CPH) and CompanderS (CPS) parameters: Dynamics 67 Gate and Ducking Gate (GAT) and Ducking (DUK) parameters: 68 Dynamics Dynamics 69 DYNAMICS Display Function 70 Dynamics Patching in a Processor DYNAMICS Icon Control Prompts Dynamics 71 Dynamics Processor Meters Dynamics Graph 72 Dynamics KEY IN and LINK Indicators Dynamics 73 Dynamics Library Recalling Dynamics Storing Dynamics 74 Dynamics Page 76 Dynamics Preset Dynamics Program Parameters Dynamics 77 attack and ambience of cymbals using overhead microphones. It 78 Dynamics intended for acoustic guitar playing rhythm chords or arpeggios. Dynamics 79 80 Dynamics Dynamics 81 Page Auxiliary Channels 83 Auxiliary Channels 84 Auxiliary Channels About the 02R Auxiliaries Auxiliary Channels 85 The AUX Buttons Fader Status SELECTED CHANNEL Controls 86 Auxiliary Channels Auxiliary Channels 87 Stereo Input Channels AUX [ON] Button AUX Pre or Post 88 Auxiliary Channels Monitor Mix Internal Effects 89 Internal Effects 90 Internal Effects About Effects Internal Effects 91 Preset Effects Programs These are the preset effects programs: No Program Name No Program Name 92 Internal Effects AUX 7 and AUX 8 Fader Status SELECTED CHANNEL Controls Internal Effects 93 94 Internal Effects Effects Internal Effects 95 Effects Library Recalling Effects Storing Effects 96 Internal Effects Page 98 Internal Effects Preset Effects Program Parameters Program 1 REVERB HALL1 Program 2 REVERB HALL2 Program 3 REVERB ROOM1 Internal Effects 99 Program 4 REVERB ROOM2 Program 5 REVERB STAGE Program 6 REVERB PLATE 100 Internal Effects Program 7 REV AMBIENCE1 Program 8 REV AMBIENCE2 Program 9 REV LIVE ROOM1 Internal Effects 101 Program 10 REV LIVE ROOM2 Program 11 REVERB VOCAL1 Program 12 REVERB VOCAL2 102 Internal Effects Program 13 REV SN.ROOM Program 14 REV SN.PLATE Program 15 CHORUS>REVERB Internal Effects 103 Program 16 FLANGE>REVERB1 Program 17 FLANGE>REVERB2 Program 18 EARLY REF.1 104 Internal Effects Program 19 EARLY REF.2 Program 20 GATE REVERB Program 21 REVERSE GATE Internal Effects 105 Program 22 DELAY>EARLY REF Program 23 DELAY L-C-R 1 Program 24 DELAY L-C-R 2 106 Internal Effects Program 25 CHORUS>DLY LCR Program 26 MONODLY>CHORUS Program 27 STEREO INI.DLY ECHO Internal Effects 107 Program 28 ECHO Program 29 CROSS ECHO Program 30 CROSS DELAY 108 Internal Effects Program 31 CHORUS1 Program 32 CHORUS2 Program 33 BROAD CHORUS Internal Effects 109 Program 34 FLANGE Program 35 SYMPHONIC Program 36 TREMOLO 110 Internal Effects Program 37 AUTO PAN Program 38 PHASING Program 39 ST.PITCH CHANGE Internal Effects 111 Program 40 VOCAL DOUBLER Page Scene Memories 113 Scene Memories 114 Scene Memories What are Scene Memories? Scene Memories 115 What is Stored in a Scene Memory? What is the Edit Buffer? Initial Data and UNDO Memory 116 Scene Memories Storing Mix Scenes Storage Confirmation Reorganizing Scene Memories Scene Memories 117 Naming a Scene Memory 118 Scene Memories Character Set Protecting Scene Memories Scene Memories 119 Recalling Scene Memories 120 Scene Memories Fader Recall Safe Restoring the Faders Scene Memories 121 Fade Time Page Automation 123 Automation 124 Automation What is the Automation Function? What is Stored in an AUTOMIX Memory? What is the 02R Memory Capacity? Page 126 Automation What is Timecode? Using SMPTE Timecode Connections Automation 127 Using MIDI Timecode (MTC) 128 Automation Automation Function Main Memory Management Fader Edit Event Edit (Memory) Main Screen 130 Automation Time Code Display Communication Speed Timecode Type and Frame Rate Automix ENABLE Page 132 Automation Automation 133 Memory Management 134 Automation AUTOMIX Name Edit Functions AUTOMIX Memory Edit Functions Automation 135 UNDO NEW 136 Automation Fader Edit MOTOR ON Fader Edit Out Page 138 Automation Event Edit (MEMORY) Automation 139 Event Edit (CH ON) 140 Automation Event Extract EXTRACT ONE/ALL MIDI 141 MIDI 142 MIDI MIDI and the 02R Bulk Data Transfers MIDI Display Function MIDI 143 Setup Receive Channel Transmit Channel OMNI Echo Program Change Assign TABLE RESET UNDO Backup MIDI 145 Bulk Dump/Request Type Number 146 MIDI Execute Page 148 Groups and Pairs Grouping Faders Groups and Pairs 149 Grouping Mutes 150 Groups and Pairs Pairing Channels Channel Pair Display Screen Page Page Digital I/O, Setup, and Utilities 153 12 Digital I/O, Setup, and Utilities 154 Digital I/O, Setup, and Utilities Word Clock Select Wordclock Digital I/O, Setup, and Utilities 155 Wordclock indicators 156 Digital I/O, Setup, and Utilities Input Signal Select Digital I/O, Setup, and Utilities 157 Cascade Conguration 158 Digital I/O, Setup, and Utilities Cascade Aux Bus Assign ID Cascade Input Attenuator 2TR-D2 to Stereo Bus Dither Dither ON/OFF Word Length 160 Digital I/O, Setup, and Utilities Solo Solo Functions Recording mode: Mixdown mode: Digital I/O, Setup, and Utilities 161 How to use Solo 162 Digital I/O, Setup, and Utilities Preferences Preferences Options Digital I/O, Setup, and Utilities 163 164 Digital I/O, Setup, and Utilities Preferences Factory Settings Digital I/O, Setup, and Utilities 165 Oscillator Oscillator Functions 166 Digital I/O, Setup, and Utilities Emphasis Monitor Digital I/O, Setup, and Utilities 167 Channel Status Monitor 168 Digital I/O, Setup, and Utilities Digital I/O, Setup, and Utilities 169 Battery Check 170 Digital I/O, Setup, and Utilities 02R System Initialization Fader Calibration Installing Options 171 13 Installing Options 172 Installing Options Digital Recording Console 02R Options 02R Options I/O Cards Installing Options 173 Peak Meter Bridge Page Installing Options 175 Installing 02R Options Single Slot Cards 176 Installing Options Double Slot Cards Installing Options 177 Peak Meter Bridge and Wooden Side Panels Memory Expansion Kit 178 Installing Options Analog I/O Card AD/DA (CD8-AD) Installing the CD8-AD Setup of the CD8-AD Installing Options 179 Digital I/O Card AES/EBU (CD8-AE/CD8-AE-S) Installing the CD8-AE/CD8-AE-S 180 Installing Options Installing Options 181 Digital I/O Card ADAT (CD8-AT) Installing the CD8-AT 182 Installing Options Installing Options 183 Digital Cascade Kit (CD8-CS) Installing the CD8-CS 184 Installing Options Installing Options 185 Cascade Settings 186 Installing Options Solo function Installing Options 187 Digital I/O Card TDIF-1 (CD8-TDII) Installing the CD8-TDII 188 Installing Options Installing Options 189 Peak Meter Bridge (MB02) Using the MB02 190 Installing Options Specifications 191 Specications 192 Specifications General Specications Specifications 193 Inputs 194 Specifications Specifications 195 196 Specifications Specifications 197 Outputs 198 Specifications Input Specications Libraries Specifications 199 200 Specifications Output Specications Digital Input and Output Specications Specifications 201 Dimensions 202 Specifications Options AD/DA I/O Card Specifications Digital I/O Card Specifications Specifications 203 Troubleshooting 204 Specifications Error Messages Specifications 205 Page 206 Specifications MIDI Data Format 1. General remarks 2. Messages transmitted and received 2-1. Program change 2-2. System exclusive messages Specifications 207 2-3. Active sensing, MIDI reset 2-4. Quarter-frame messages 3. ECHO BACK 4. Transmission Condition 208 Specifications 5. Receive Condition Specifications 209 Parameter Change and Request Format 210 Specifications Specifications 211 212 Specifications Specifications 213 Bulk Dump and Request Format 214 Specifications Specifications 215 216 Specifications Specifications 217 218 Specifications Specifications 219 220 Specifications Specifications 221 222 Specifications Specifications 223 Page Glossary 225 Glossary 226 Glossary Glossary 227 228 Glossary Glossary 229 230 Glossary Glossary 231 References and Further Reading Page Index 233 Index 234 Index C D Index 235 236 Index E F Index 237 I M O 238 Index P R Index 239 U 240 Index W MIDI Implementation Chart YAMAHA MIDI Implementation Chart Version:1.0 MTC quarter frame message is recognized (MTC IN)Notes *1 : For program 1 - 128, memory #0 - #64 is selected. *2 : Bulk Dump/Request and Parameter Change/Request User Setting Sheet