Automation 135
Digital Recording Console 02R User’s Guide
•RECALL – This icon is used to recall an AUTOMIX program from the
library. Select the icon with the CURSOR buttons. Use the encoder
wheel to select an AUTOMIX program and press the [ENTER] button.
The 02R will display a popup confirmation request message asking if
you want to recall the selected program. The popup has two control
icons: “CANCEL” and “EXECUTE”.
CANCEL is the default. To cancel the RECALL operation, either press
the [ENTER] button or wait about 10 seconds – the RECALL operation
will be automatically cancelled.
To store your settings, use the CURSOR buttons to select the
“EXECUTE” control icon and press the [ENTER] button. The recalled
program is now the current program. You can undo or redo the recall
operation.
•CLEAR – delete the data located in the currently selected AUTOMIX
memory location. You cannot undo the CLEAR function.
•A.CLR – delete all the data from all AUTOMIX memory locations. You
cannot undo the ALL CLEAR function.
UNDO
This operation allows you to undo the following conditions: updating the
automix (after recording has been stopped via the STOP transport
function or due to the interrupted timecode), recalling the data from the
automix memory into the current mix, creating a new mix, or aborting the
automix. It returns the current automix to its previous state.
NEW
Before you can record an automix session, you must create a new
automix. This operation allows you to create a new mix. As a default new
mix, the current scene memory (the last scene memory to be stored or
recalled) will be inserted at timecode location 00:00:00.00. Later, you can
edit the timecode location using the AUTOMIX event edit operations.