Yamaha 02R Event Edit (MEMORY)

138 Automation
Digital Recording Console 02R User’s Guide
Event Edit (MEMORY)
The fourth AUTOMIX display function is the Event Edit (MEMORY)
screen shown below:
The display consists of a table listing Time Code, Memory (event), and
Channel.
To the right of the table are two control icons; INSERT and DELETE. You
can insert scene memory changes (no corresponding channel) and recall
libraries (channel library, dynamics library, effect library, and equalizer
library each with a corresponding channel).
When you insert an event, it is always given the same timecode value as
the previous event. Use the CURSOR buttons to select the timecode field
and adjust the timecode value to suit. Use the CURSOR buttons to select
the event field and use the encoder wheel to select the desired event. Use
the CURSOR buttons to select the channel field (not applicable if the
event is a scene memory recall) and use the encoder wheel to select the
desired channel.
When you change the timecode value for an event, the events are
automatically sorted in timecode location.
1. Press the [AUTOMIX]
button.
An AUTOMIX display
function appears.
Press the [AUTOMIX ]
button repeatedly to get
to the the “Event Edit
(MEMORY)” screen.
2. Use the CURSOR buttons
to select an event to
edit.
3. Use the CURSOR buttons
to select the INSERT icon
and press [ENTER] to
insert an event.
4. Use the CURSOR buttons
to select the DELETE icon
and press [ENTER] to
delete the current event.
AUTOMIX