Groups and Pairs 149

Digital Recording Console 02R User’s Guide
Grouping Mutes
The 02R also allows you to group channel status controls for multiple
channel control using only one channel ON button. The channels in a
group can be on or off depending on their status when they were grouped.
Pressing a channel ON button toggles the status of all the channels in the
group. There are four groups available: E, F, G, and H.
Display Screen
Shown below is the second GROUP display function - the Mute Group
screen. You can group the input channels – MIC/LINE 1 through 16 and
LINE 17/18 through 23/24 – and the tape and effect returns – TAPE 1
through 16, EFF1 and EFF2:
Select this screen by pressing the [GROUP] button. You may have to press
more than once to get this screen.
The channels are listed in two main rows with the four group icons below
each channel number.
On the right side of the display are the “Enable” group select icons. You can
change the status of the channels within a group by disabling the group by
selecting the corresponding icon (a group is enabled when its icon is
highlighted in reverse video) and pressing the [ENTER] button. The LEDs
inset in the [SEL] buttons of the channels in the group will flash and they
will be ungrouped temporarily, allowing you to adjust the individual
channel status of the group members.
Note: A channel can only be assigned to one group. If you attempt to assign a
channel to more than one group, the error message “Duplicate Grouping!” will
flash on the display.
1. Press the [GROUP]
button.
A GROUP display
function appears. Press
the [GROUP] button until
the “Mute Group”
screen.
2. Use the CURSOR buttons
to select from group E
through H.
3. Use the [SEL] buttons to
add or remove channels
to and from the selected
group.
Another method is to use
the CURSOR buttons to
select the channels and
press the [ENTER] button.
4. Select a “Enable” group
icon and turn it on or off
by pressing the [ENTER]
button.
When a group is off, the
LEDs of the channels
flash. You can change
the channel status of
any channel in the
group.
Note: Stereo-pair channels
are added or removed
together.
GROUP