Digital I/O, Setup, and Utilities 163
Digital Recording Console 02R User’s Guide
You should leave this option in its default state when your 02R is going
to be operated by an inexperienced person. Forcing them to respond to
a confirmation message may prevent the accidental loss of your
valuable data.
When you confirm a STORE operation, any existing data in the
selected program location will be overwritten.
YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS
ITS CONFIRMATION POPUP MESSAGE!
•Recall Confirmation – With this option selected, the 02R will request
you confirm any scene memory or library recall operation.
•Mix Update Confirmation – With this option selected, the 02R will
request you confirm saving the update of the current data, or the
ABORT command, when an AUTOMIX recording is completed.
•REC Recall Safe Fader – With this option selected, you can record
fader movement events during an AUTOMIX recording even though
the faders were set to Recall Safe.
•Fader Flip Recall Safe – With this option selected, the status of the
[FLIP] button is not recalled when you recall a scene memory. When
you recall a scene memory, the status of the [FLIP] button remains as it
was before the scene memory was recalled.
•Remote Talkback (C3) – With this option selected, you can enable the
Talkback system by sending a MIDI Note On message for C3. You
disable the Talkback system by sending a MIDI Note Off message for
C3.
•Transmit Key Remote – With this option selected, when you operate
any buttons, controls, or faders, the 02R will transmit system exclusive
parameter change messages from its MIDI OUT connector. This is
intended to be used to remotely control another 02R.
This option is cancelled when the 02R is turned off.
•Fast Meter Fall Time – With this option selected, the level meters will
respond more quickly to level changes. When the option is not
selected, the level meters delay their fall in order to allow you to see the
level changes more clearly.
•Pre Fader Direct Out – With this option selected, the signal being sent
to the direct outputs will bypass the faders.
•Slate Tone – With this option selected, when you press the [SLATE]
button, a 50 Hz tone at –34 dB is recorded along with the talkback
input.
•TC Drop Warning OFF – With this option selected, the 02R will not
report a warning when the timecode reader detects a frame dropout.
If you have a noisy connection to your timecode source, or it was
poorly recorded on an analog recorder, this message may appear on
the screen so often that it becomes distracting. However, if you know
your timecode source is reliable, you may want to leave this option off
so that the 02R can warn you of any undesirable timecode events.