Secondary Recording Tutorial 43

Digital Recording Console 02R Getting Started Guide
Setting the Auxiliary Send Level
The following example shows setting the send level for MIC/LINE 1 to the
first auxiliary channel, AUX1.
1. Press the [AUX 1] button.
The AUX1 display function appears:
The faders change from channel level controls to auxiliary send level
controls. To indicate the change , the AUX LED of the FADER STATUS
indicator will illuminate. The number indicator corresponding to the
current AUX button (in this case, AUX1) is also illuminated. The faders will
automatically relocate from their channel level positions to the auxiliary
send level positions.
Although the faders have moved to the auxiliary send level positions, the
02R remembers the channel signal levels. You will still be able to hear the
signal.
2. Select MIC/LINE 1 using the [SEL] buttons or the CURSOR buttons.
Turn the auxiliary send on by pressing the [AUX 1] button and then the
[ON] button in the AUX group of the SELECTED CHANNEL controls. The
default is for the send to be ON, therefore this step is not usually required.
3. To change the auxiliary send from post to pre fader, press the
[ENTER] button.
Note: Avoid blocking the fader movements when the faders relocate to their
auxiliary send positions by placing objects on the 02R. It is possible to damage the
faders.
Note: In order to change the auxiliary send status from on to off, you must first
select the send channel with the corresponding button of the SELECTED
CHANNEL – AUX controls
AUX 1
INPUT
AUX
1234
5678
FADER STATUS