186 Installing Options
Digital Recording Console 02R User’s Guide
Solo function
When two or more 02R units are cascaded together, only the [SOLO] button
on the cascade master continues to function. When you press the [SOLO]
button on the cascade master, however, you can solo individual channels
on the cascade slave units.
1. On the 02R cascade master, press the [SETUP] button until the
“Solo” screen appears.
2. Select the “Mode” field with the CURSOR buttons to set the solo
function status.
You can only set this status on the cascade master.
See “Solo” on page 160 of the User’s Guide for further details.
3. On the 02R cascade master, press the [SOLO] button.
The LEDs inset in the [ON] buttons of all the cascaded 02R units will
flash.
4. Press the [ON] button of the channel (or channels) that you want
to solo.
During recording, the channel signal will be sent to the SOLO bus on
the cascade master. You can monitor the signal using the monitor
system connected to the cascade master 02R.
At mixdown, the signal will be sent to the STEREO bus.