Dynamics 73

Digital Recording Console 02R User’s Guide
Dynamics Library
The Dynamics Library is used to access and store dynamics programs.
There are 40 preset programs (1 to 40) for you to recall and 88 user
programs (41 to 128 plus UNDO) for you to store your own dynamics
programs.
You can access this screen from the DYNAMICS display function by
selecting the LIB icon with the CURSOR buttons and pressing the [ENTER]
button.
Display Screen
Shown below is the DYNAMICS Library display screen:
The top of the display shows the Dynamics library icon, the main control
prompts, the dynamics graph, and the gain reduction meter plus a level
meter for the currently selected channel pair. This will be the curve that was
seen in the previous DYNAMICS display screen.
The middle of the display shows a scrolling list of dynamics programs. The
name of the dynamics program under the cursor is highlighted. When the
cursor is on the STORE, RECALL, COPY, or PASTE control icons, the
encoder wheel is used to scroll through the program list. A small diagram
of the dynamics graph of the highlighted program is shown to the right
along with its vital statistics, such as Attack, Hold, Decay, and so forth.
Beside the list of dynamics programs is the TITLE EDIT field. The CURSOR
buttons are used to select the character, and the encoder wheel is used to
change its value.
The bottom of the display contains the control button icons. Use the
CURSOR buttons to select from the STORE, RECALL, COPY, PASTE, INS.,
and DEL. icons.
1. Press the [DYNAMICS]
button again.
The DYNAMICS Library
display function
appears.

Recalling Dynamics

Programs
1. Select a channel using
the [SEL] buttons.
2. Use the CURSOR buttons
to select the RECALL
icon and rotate the
encoder wheel to select
a dynamics program .
3. Press the [ENTER] button.
The dynamics program
is recalled.

Storing Dynamics

Programs
1. Use the CURSOR buttons
to select the STORE icon
and select a dynamics
program with the
encoder wheel.
2. Use the CURSOR buttons
and encoder wheel to
name the program.
3. Press the [ENTER] button.
The 02R pops up a
confirmation request.
4. Select EXECUTE and
press the [ENTER] button.
The dynamics program
is stored.
DYNAMICS