Yamaha 02R Grouping Faders

148 Groups and Pairs
Digital Recording Console 02R User’s Guide
Grouping Faders
The Digital Recording Console 02R allows you to group the faders for
multiple fader control using only one fader. This makes it easy to control
several faders simultaneously. The input channel and the tape and effect
returns can be grouped. There are four groups available: A, B, C, and D.
Display screen
Shown below is the first GROUP display function - the Fader Group screen.
You can group the input channels – MIC/LINE 1 through 16 and LINE
17/18 through 23/24 – and the tape and effect returns – TAPE 1 through 16,
EFF1 and EFF2:
Select this screen by pressing the [GROUP] button. You may have to press
more than once to get this screen - there are two screens in the GROUP
display function.
The faders are listed in two main rows with the four group icons below
each channel number.
On the right side of the display are the “Enable” group select icons. You can
adjust the level balance within a group by turning the group on or off by
selecting the corresponding icon (a group is ON when its icon is
highlighted in reverse video) and pressing the [ENTER] button. The LEDs
inset in the [SEL] buttons of the faders in the group will flash and they will
be ungrouped temporarily, allowing you to adjust the individual fader
levels.
If you try to operate multiple faders, the first fader you select will have
priority. It is possible to upset the relative positions of the faders if you
attempt to operate more than one at a time.
Note: A fader can only be assigned to one group. If you attempt to assign a fader
to more than one group, the error message “Duplicate Grouping!” will flash on the
display.
1. Press the [GROUP]
button.
A GROUP display
function appears. Press
the [GROUP] button
again if the “Fader
Group” screen is not
shown.
2. Use the CURSOR buttons
to select from group A
through D.
3. Use the [SEL] buttons to
add or remove faders to
and from the selected
group.
Another method is to use
the CURSOR buttons to
select the faders and
press the [ENTER] button.
4. Select a “Enable” group
icon and turn it on or off
by pressing the [ENTER]
button.
When a group is off, the
LEDs of the faders flash.
The individual levels can
be adjusted.
Note: Stereo-pair channels
are added or removed
together.
GROUP