Specifications and requirements
Recommended engine oil group: SAE
API SE/SF/SG/SH/SJ/SL
Total engine oil quantity (oil pan capacity):
7.1L (7.50 US qt, 6.25 Imp.qt) Lubrication:
Wet sump Recommended gear oil:
YAMALUBE MARINE LOWER UNIT GEAR LUBE HD or Hypoid gear oil: SAE 90, API
SAE 80W, API
1.045 L (1.105 US qt, 0.920 Imp.qt)
Tightening torque for engine:
Spark plug:
28.0Nm (2.86
54.0Nm (5.51
EMU33554
Installation requirements
EMU40480
Boat horsepower rating
EWM01560
WARNING
Overpowering a boat can cause severe in- stability.
Before mounting the outboard motor, check that the horsepower of the outboard motor does not exceed the maximum horsepower rating on the capacity plate of the boat. If the boat does not have a capacity plate, consult the boat manufacturer.
EMU40490
Mounting outboard motor
EWM02500
WARNING
●Improper mounting of the outboard mo- tor could result in hazardous conditions such as poor handling, loss of control, or fire hazards.
●Because the outboard motor is very heavy, special equipment and training is required to mount it safely.
Your dealer or other person experienced in proper rigging should mount the outboard motor using correct equipment and complete rigging instructions. For further information, see page 46.
EMU33581
Remote control requirements
EWM01580
WARNING
●If the engine starts in gear, the boat can move suddenly and unexpectedly, pos- sibly causing a collision or throwing passengers overboard.
●If the engine ever starts in gear, the
The remote control unit must be equipped with a
EMU25694
Battery requirements
EMU25713
Specifications of Battery
Use a fully charged battery that meets the following specifications. The engine cannot be started if battery voltage is too low.
Minimum cold cranking amps (CCA/SAE):
700.0 A
Minimum marine cranking amps (MCA/ABYC):
900.0 A
Minimum reserve capacity (RC/SAE): 220 minutes
14