Instruments and indicators

EMU41390

Digital tachometer

The tachometer shows the engine speed and has the following functions.

All segments of the display will light momentarily after the main switch is turned on and will return to normal thereafter.

1 2

3

5

4

6

7 ZMU01840

1.Tachometer

2.Trim meter

3.Hour meter

4.Low oil pressure-alert indicator

5.Overheat-alert indicator

6.Set button

7.Mode button

EMU36050

Tachometer

The tachometer displays engine speed in hundreds of revolutions per minute (r/min). For example, if the tachometer display reads “22” then the engine speed is 2200 r/min.

EMU26621

Trim meter

This meter shows the trim angle of your outboard motor.

●Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired using the pow- er trim and tilt switch.

●If the trim angle of your motor exceeds the trim operating range, the top segment on the trim meter display will blink.

ZMU01740

EMU26651

Hour meter

This meter shows the number of hours the engine has been run. It can be set to show the total number of hours or the number of hours for the current trip. The display can also be turned on and off.

 

ZMU01741

To

change the display format, press the

“

” (mode) button. The display can show

total hours or trip hours, or turn off.

To reset the trip hours, simultaneously press

the “” (set) and “” (mode) buttons for more than 1 second while the trip hours are displayed. This resets the trip counter to 0 (ze- ro).

The total number of hours the engine has been run cannot be reset.

EMU40810

Low oil pressure-alert indicator

If oil pressure drops too low, the alert indicator will start to blink. For further information, see page 43.

31