Operation
1 
ZMU06924
1. Trim rod
EMU40733
Procedure for tilting down
1.If using the tilt support shaft, fully tilt the outboard motor up, and then remove the tilt support shaft.
1
ZMU06925
1.Tilt support shaft
2.Push the “
” (down) side of the power trim and tilt switch to tilt the outboard mo- tor down.
1
DN
ZMU06941
1. Power trim and tilt switch
DN
1
ZMU06987
1. Power trim and tilt switch
EMU28061
Shallow water
EMU40701
Cruising in shallow water
The outboard motor can be tilted up partially to allow operation in shallow water.
ECM02360
NOTICE
Do not tilt the outboard motor up so that the cooling water inlet on the lower unit is above the surface of the water when setting up for and cruising in shallow water. Otherwise severe damage from overheating can result.
1 | ZMU06942 |
1. Cooling water inlet
EMU40711
Procedure for shallow water cruising
1.Move the remote control lever to the neu- tral position.
63