Instruments and indicators

EMU26752

Fuel flow meter

The fuel flow meter displays the amount of fuel flow over a one-hour period, at the current rate of engine operation.

●The fuel flow meter displays gallons/hour or liters/hour according to operator prefer- ence. Select the desired units of measure- ment by setting the selector switch on the back of the gauge during installation.

1.Selector switch

●The fuel consumption meter and fuel econ- omy meter will indicate the same unit of measurement.

Fuel flow readings are not accurate when the engine is operating under about 1300 r/min. As the fuel pump cycles on and off, the display indicates either no fuel flow or higher flow than the actual average use.

Dual engine users: the fuel flow meter can display the fuel flow of either or both engines.

To change the fuel flow display, press the “” (set) button repeatedly until the gauge displays “” (for fuel flow to the starboard engine only), “” (for fuel flow to the port engine only), or “” (for total fuel flow both engines).

EMU36090

Fuel consumption meter / Fuel economy meter / Twin engine speed synchronizer

The display shows either the fuel consumption meter, the fuel economy meter, or the twin engine synchronizer.

To change the display, press the “” (mode) button repeatedly until the indicator on the face of the gauge points to “” (fuel con-

sumption meter), “” (fuel economy

meter), or “” (twin engine speed syn- chronizer).

EMU26761

Fuel consumption meter

This gauge displays the total amount of fuel consumed since the gauge was last reset. To reset the total fuel consumption meter to

zero, press the “” (set) and “” (mode) buttons at the same time.

ZMU01751

EMU26771

Fuel economy

This gauge displays the approximate distance per liter or gallon when cruising.

ZMU01749

35