Components

3 2

1

ZMU07043

1.Engine shut-off cord (lanyard)

2.Clip

3.Engine shut-off switch

EMU26091

Main switch

The main switch controls the ignition system; its operation is described below.

●“” (off)

With the main switch in the “” (off) posi- tion, the electrical circuits are off, and the key can be removed.

●“” (on)

With the main switch in the “” (on) position, the electrical circuits are on, and the key cannot be removed.

●“” (start)

With the main switch in the “” (start) po- sition, the starter motor turns to start the en- gine. When the key is released, it returns automatically to the “ ” (on) position.

OFF ON START

ZMU06245

ON

OFF START

ZMU07019

EMU32053

Power trim and tilt switch on remote control

The power trim and tilt system adjusts the outboard motor angle in relation to the transom. Pushing the switch “” (up) trims the outboard motor up, and then tilts it up. Pushing the switch “” (down) tilts the outboard motor down and trims it down. When the switch is re- leased, the outboard motor will stop in its current position. For instructions on using the power trim and tilt switch, see pages 59 and 61.

UP

DN

1

ZMU06981

1. Power trim and tilt switch

EMU26154

Power trim and tilt switch on bottom cowling

The power trim and tilt switch is located on the side of the bottom cowling. Pushing the switch “” (up) trims the outboard motor up, and then tilts it up. Pushing the switch “” (down)

27