Components

1

ZMU06904

1.Cap

2.To increase resistance, turn the adjuster clockwise. To decrease resistance, turn

the adjuster counterclockwise.

WARNING! Do not overtighten the fric- tion adjuster. If there is too much re- sistance, it could be difficult to move the remote control lever, which could result in an accident. [EWM02580]

1

ZMU07026

1. Throttle friction adjuster

1

3.Install the cap.

When constant speed is desired, tighten the adjuster to maintain the desired throttle set- ting.

EMU25994

Engine shut-off cord (lanyard) and clip

The clip must be attached to the engine shutoff switch for the engine to run. The cord should be attached to a secure place on the operator’s clothing, or arm or leg. Should the operator fall overboard or leave the helm, the cord will pull out the clip, stopping ignition to the engine. This will prevent the boat from running away under power. WARNING! Attach the engine shut-off cord to a secure place on your clothing, or your arm or leg while operating. Do not attach the cord to clothing that could tear loose. Do not route the cord where it could become entangled, preventing it from functioning. Avoid accidentally pulling the cord during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.

[EWM00122]

3

2

1

ZMU07027

 

1.

Engine shut-off cord (lanyard)

 

2.

Clip

ZMU06989

3.

Engine shut-off switch

1. Throttle friction adjuster

26