Instruments and indicators

EMU36221

Overheat alert

If the engine temperature rises too high while cruising, the overheat-alert indicator will start to blink. The engine speed will automatically decrease to about 2000 r/min.

EMU36150

Water separator alert

This indicator will blink if water has accumulated in the water separator (fuel filter) while cruising. In such an event, stop the engine immediately and see page 85 of this manual to drain the water from the fuel filter. Get back to the port soon and consult a Yamaha dealer immediately.

ZMU05421

ZMU05422

Stop the engine immediately if the buzzer sounds and the overheat alert device has ac- tivated. Check the cooling water inlet for clog- ging.

ECM01592

NOTICE

●Do not continue to run the engine if the overheat-alert indicator blinks. Serious engine damage will occur.

●Do not continue to operate the engine if a alert device has activated. Consult your Yamaha dealer if the problem can- not be located and corrected.

ZMU05423

ZMU05424

ECM00910

NOTICE

Gasoline mixed with water could cause damage to the engine.

EMU36160

Engine trouble alert

This indicator will blink if the engine malfunctions while cruising. Get back to the port soon and consult a Yamaha dealer immediately.

39