Specifications and requirements

fectiveness. Consult your Yamaha dealer concerning what may work best for the locally available gasoline and environmental condi- tions.

EMU41350

Anti-fouling paint

A clean hull is required to maintain your boat’s performance. Boats moored in the water should be protected from marine growth (bar- nacles, mussels, and marine plants). If approved by regulations for your area, the bottom of the hull can be coated with an anti- fouling paint to inhibit marine growth.

Anti-fouling paints specifically formulated for use on aluminum may be applied to the outboard motor. The original Yamaha paint surface may be scuffed lightly before applying anti-fouling paint, but do not remove the original paint. Removal of the original paint will increase the rate of corrosion.

ECM02410

NOTICE

Anti-fouling paint for fiberglass and wood may contain materials, such as copper, graphite, and tin, that can cause corrosion if applied to aluminum boats and outboard motor components. Never apply these types of paint to your outboard motor because rapid corrosion damage could oc- cur.

Sacrificial anodes are attached to the outboard motor to provide corrosion protection and must never be painted.

ECM02420

NOTICE

Painted sacrificial anodes will not provide corrosion protection.

EMU40301

Outboard motor disposal re-

quirements

Never illegally discard (dump) the outboard motor. Yamaha recommends consulting the dealer about discarding the outboard motor.

EMU36352

Emergency equipment

Keep the following items onboard in case there is trouble with the outboard motor.

●A tool kit with assorted screwdrivers, pliers, wrenches (including metric sizes), and electrical tape.

●Waterproof flashlight with extra batteries.

●An extra engine shut-off cord (lanyard) with clip.

●Spare parts, such as an extra set of spark plugs.

Consult your Yamaha dealer for details.

EMU25221

Emission control information

EMU25230

North American models

This engine conforms to U.S. Environmental Protection Agency (EPA) regulations for marine SI engines. See the label affixed to your engine for details.

EMU31560

Approval label of emission control certificate

This label is attached to the bottom cowling. New Technology; (4-stroke) MFI

1

ZMU06892

1. Approval label location

18