Operation

1 2

3

2 3

4

ZMU07016

1.Top cowling

2.Protrusion

3.Holder

4.Bottom cowling

5.Push the cowling lock levers inward to secure the top cowling.

1

ZMU06920

1. Cowling lock lever

1

ZMU06921

1.Cowling lock lever

6.Check the fitting of the top cowling by pushing it with both hands. NOTICE: If the top cowling is not installed cor-

rectly, water can enter the top cowling and damage the engine, or the top cowling can blow off at high speeds.

[ECM02370]

ZMU06922

EMU40583

Checking power trim and tilt unit

EWM02523

WARNING

●Never get under the lower unit while it is tilted, even when the tilt support shaft is installed. Severe injury could occur if the outboard motor accidentally falls.

●Body parts can be crushed between the outboard motor and the clamp bracket when the outboard motor is trimmed or tilted.

●Make sure that no one is near the out- board motor before performing this check.

1.Check the power trim and tilt unit for fluid leakage.

ZMU06969

52