Instruments and indicators

12

ZMU05417

1.Set button

2.Mode button

1 4 5 2

3

6

7

8

9

ZMU05418

1.Tachometer

2.Trim meter

3.Multifunction display

4.Water detection-alert indicator

5.Engine trouble alert/maintenance indicator

6.Cooling water pressure

7.Oil pressure (4-stroke models)

8.Cooling water/engine temperature

9.Battery voltage

EMU36110

Start-up checks

Place the remote control lever in neutral and turn the main switch to “” (on). After all the displays come on and the total hour display comes on, the gauge will change to normal operation. If the buzzer sounds and the water separator-alert indicator blinks, consult your Yamaha dealer immediately.

TIP:

To stop the buzzer, press the “” (set) or

“” (mode) button.

EMU36130

Low oil pressure-alert

If the engine oil pressure drops too low, the low oil pressure-alert indicator will start to blink, and the engine speed will automatically decrease to about 2000 r/min.

ZMU05430

ZMU05431

Stop the engine immediately if the buzzer sounds and the low oil pressure-alert indicator blinks. Check the engine oil quantity and replenish oil if necessary. If the alert device has activated while the appropriate engine oil quantity is maintained, consult your Yamaha dealer.

ECM01601

NOTICE

Do not continue to run the engine if the low oil pressure alert device has activated. Serious engine damage will occur.

38