Components

tilts the outboard motor down and trims it down. When the switch is released, the outboard motor will stop in its current position.

For instructions on using the power trim and tilt switch, see page 61.

EWM01031

WARNING

Use the power trim and tilt switch located on the bottom cowling only when the boat is at a complete stop with the engine off. Attempting to use this switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of collision with another boat or an obstacle.

UP

DN

1

ZMU06907

1. Power trim and tilt switch

EMU40760

Cowling lock lever

The cowling lock levers are used to secure the top cowling.

1

ZMU06909

1. Cowling lock lever

1

ZMU06910

1. Cowling lock lever

EMU40802

Flushing device

The flushing device is used to clean the cooling water passages of the outboard motor using a garden hose and tap water. For instructions on using the flushing device, see page 66.

1

ZMU06911

1. Flushing device

EMU40822

Fuel filter

The fuel filter functions to remove foreign material and separate water from the fuel. If water separated from the fuel exceeds a specific volume, the alert system will activate. For further information, see page 44.

28