Maintenance

ZMU06952

EMU40891

Inspecting propeller

EWM02561

WARNING

You could be seriously injured if the engine accidentally starts when you are near the propeller. Before inspecting, remov- ing, or installing the propeller, move the remote control lever to the neutral posi- tion, turn the main switch to the “ ” (off) position, remove the key, and remove the clip from the engine shut-off switch. Turn off the battery cut-off switch if your boat has one.

Do not use your hand to hold the propeller when loosening or tightening the propeller nut. Place a block of wood between the anti- cavitation plate and the propeller to prevent the propeller from turning.

ZMU06953

Checkpoints

●Check each of the propeller blades for ero- sion from cavitation or ventilation, and other damage.

●Check the propeller shaft for damage.

●Check the splines for wear and damage.

●Check for fish line tangled around the pro- peller shaft.

1

ZMU06954

1. Propeller shaft

EMU40912

Removing propeller

1.Straighten the cotter pin and pull it out us- ing a pair of pliers.

2.Remove the propeller nut, washer, and spacer. WARNING! Do not use your hand to hold the propeller when loos- ening the propeller nut. [EWM01890]

77