ES-3124 User’s Guide

Table 85 interface port-channel Commands (continued)

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

multicast-limit

 

Enables the interface multicast

13

 

 

 

limit.

 

 

 

<pkt/s>

Sets how many multicast packets

13

 

 

 

the interface receives per second.

 

 

dlf-limit

 

Enables the Destination Lookup

13

 

 

 

Failure (DLF) limit.

 

 

 

<pkt/s>

Sets the interface DLF limit in

13

 

 

 

packets per second (pps).

 

 

diffserv

 

Enables DiffServ on the port(s).

13

 

qos priority

<0 .. 7>

Sets the quality of service priority

13

 

 

 

for an interface.

 

 

mirror

 

Enables port mirroring in the

13

 

 

 

interface.

 

 

 

dir

Enables port mirroring for

13

 

 

<ingressegress

incoming, outgoing or both

 

 

 

both>

incoming and outgoing traffic.

 

 

 

Port mirroring copies traffic from

 

 

 

 

 

 

 

 

one or all ports to another or all

 

 

 

 

ports for external analysis.

 

 

speed-duplex

<auto10-

Sets the duplex mode (half or

13

 

 

half10-

full) and speed (10, 100 or

 

 

 

full100-

1000 Mbps) of the connection on

 

 

 

half100-

the interface. Selecting auto

 

 

 

(auto-negotiation) makes one port

 

 

 

full1000-full>

able to negotiate with a peer

 

 

 

 

automatically to obtain the

 

 

 

 

connection speed and duplex

 

 

 

 

mode that both ends support.

 

 

bpdu-control

 

Sets how Bridge Protocol Data

13

 

<peertunneldi

 

Units (BPDUs) are used in STP

 

 

scardnetwork>

 

port states.

 

 

 

 

 

 

no

egress set

Disables the outgoing traffic port

13

 

 

<port-list>

list for a port-based VLAN.

 

 

 

protocol-based-

Disables protocol based VLAN of

13

 

 

vlan ethernet-

the specifed protocol on the port.

 

 

 

type <ethernet-

 

 

 

 

type>

 

 

 

 

igmp-immediate-

Disables IGMP immediate leave on

13

 

 

leave

the port.

 

 

 

igmp-filtering

Disables IGMP filtering on the port.

13

 

 

profile

 

 

 

 

igmp-group-

Disables IGMP group limitation.

13

 

 

limited

 

 

 

 

ingress-check

Disables ingress checking on the

13

 

 

 

port(s).

 

 

 

gvrp

Disable GVRP on the port(s).

13

 

 

flow-control

Disables flow control on the port(s).

13

Chapter 34 Introducing Commands

261