ES-3124 User’s Guide

Figure 83 DiffServ

The following table describes the related labels you use to create a static route.

Table 60 Static Routing

LABEL

DESCRIPTION

 

 

Diffserv

Click this to return to the main DiffServ screen.

 

 

DSCP to

In this section you map each DSCP value with an 802.1p value in the drop down list

802.1p

box.

Mapping

 

0-63

This field displays each DSCP value.

 

 

802.1p Priority

Use the drop down list box to select the IEEE 802.1p priority (0 to 7) to which you

 

would like to map this DSCP value.

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are done

 

configuring.

Cancel

Click Cancel to reset the fields.

190

Chapter 25 DiffServ Code Point