![](/images/backgrounds/127146/127146-33798x1.png)
Figure 39 Protocol Based VLAN
The following table describes the labels in this screen.
Table 18 Protocol Based VLAN Setup
LABEL | DESCRIPTION |
Active | Check this box to activate this protocol based VLAN. |
|
|
Port | Type a port to be included in this protocol based VLAN. |
| This port must belong to a static VLAN in order to participate in a protocol based |
| VLAN. See Chapter 8 on page 85 for more details on setting up VLANs. |
Name | Enter up to 11 alphanumeric characters to identify this protocol based VLAN. |
|
|
Use the drop down list box to select a predefined protocol to be included in this | |
| protocol based VLAN or select Others and type the protocol number in hexadecimal |
| notation. For example the IP protocol in hexadecimal notation is 0800, and Novell IPX |
| protocol is 8137. |
| Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff |
| are not allowed to be used for protocol based VLANs. |
VID | Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN |
| which you defined in the Advanced Applications, VLAN screens. |
Priority | Select the priority level that the switch will assign to frames belonging to this VLAN. |
|
|
Add | Click Add to save your changes to the switch’s |
| these changes if it is turned off or loses power, so use the Save link on the top |
| navigation panel to save your changes to the |
| configuring. |
Cancel | Click Cancel to reset the fields. |
|
|
Index | This is the index number identifying this protocol based VLAN. Click on any of these |
| numbers to edit an existing protocol based VLAN. |
Active | This field shows whether the protocol based VLAN is active or not. |
|
|
Port | This field shows which port belongs to this protocol based VLAN. |
|
|
Name | This field shows the name the protocol based VLAN. |
|
|
Ethernet Type | This field shows which Ethernet protocol is part of this protocol based VLAN. |
|
|
VID | This field shows the VLAN ID of the port. |
96 | Chapter 8 VLAN |