ES-3124 User’s Guide

5.1.2 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 10 so that any untagged frames received on that port get sent to VLAN 2.

Figure 23 Initial Setup Network Example: Port VID

1Click Advanced Applications and VLAN in the navigation panel. Then click the VLAN Port Setting link.

2Enter 2 in the PVID field for port 10 and click Apply to save your changes back to the

run-time memory. Settings in the run-time memory are lost when the ES-3124’s power is turned off.

Chapter 5 Initial Setup Example

63