ZyXEL Communications ES-3124 manual 253

ES-3124 User’s Guide

Table 84 Command Summary: Configuration Mode (continued)

COMMAND			DESCRIPTION	PRIVILEGE
fe-spq			Sets the switch to use SPQ to	13
<q0q1..			service the subsequent queue(s)
q7>			after and including the specified
			queue for the 10/100 Mbps
			Ethernet ports.
ip	route	<ip> <mask>	Creates a static route.	13
		<next-hop-ip>
		<ip> <mask>	Sets the metric of a static route or	13
		<next-hop-ip>	deactivates a static route.
		[metric
		<metric>]
		[name <name>]
		[inactive]
	name-server	<ip>	Sets the IP address of a domain	13
			name server.
	address default-	<ip>	Sets the default gateway's IP	13
	gateway		address for the out-of-band
			management port.
	address	<ip> <mask>	Sets the IP address and subnet	13
			mask of the out-of-band
			management port.
mac-	name <name> mac		Configures a static MAC address	13
forward	<mac-addr> vlan		forwarding rule.
	<vlan-id>
	interface
	<interface-id>
		inactive	Disables a static MAC address	13
			forwarding rule.
mac-filter	name <name> mac		Configures a static MAC address	13
	<mac-addr> vlan		port filtering rule.
	<vlan-id> drop
	<src/dst/both>
		inactive	Disables a static MAC address	13
			port filtering rule.
mirror-			Enables port mirroring.	13
port
	<port-num>		Sets the monitor port (the port to	13
			which traffic is copied for
			analysis).
lacp			Enables Link Aggregation Control	13
			Protocol (LACP).
	system-priority	<1-65535>	Sets the priority of an active port	13
			using LACP.
trunk	<T1T2T3T4T5		Activates a trunk group.	13
	T6>
	<T1T2T3T4T5		Enables LACP for a trunk group.	13
	T6> lacp

Chapter 34 Introducing Commands 251