ES-3124 User’s Guide

Table 83 Command Summary: Enable Mode (continued)

COMMAND

 

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

cable-

<port-list>

 

Performs a basic connectivity test

13

diagnosti

 

 

on the ports. Displays “Ok” if

 

cs

 

 

connector is inserted in the port,

 

 

 

“Open” if no connector is inserted

 

 

 

 

in the port or “Unknown” if this test

 

 

 

 

cannot determine the status.

 

ping

<iphost-name>

 

Sends Ping request to an Ethernet

13

 

 

 

device.

 

 

 

[vlan <vlan-

Sends Ping request to an Ethernet

13

 

 

id>][..]

device in the specified VLAN(s).

 

 

help

 

Displays command help

13

 

 

 

information.

 

tracerout

<iphost-name>

 

Determines the path a packet

13

e

[in-bandout-of-

 

takes to a device.

 

 

bandvlan <vlan-

 

 

 

 

id>][ttl <1-

 

 

 

 

255>] [wait <1-

 

 

 

 

60>] [queries

 

 

 

 

<1-10>]

 

 

 

 

help

 

Displays command help

13

 

 

 

information.

 

ssh

<12>

 

Connects to an SSH server with

13

 

<[user@]dest-ip>

 

the specified SSH version.

 

 

 

[command </>]

Connects to an SSH server with

13

 

 

 

the specified SSH version and

 

 

 

 

addition commands to be

 

 

 

 

executed on the server.

 

34.11.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 84 Command Summary: Configuration Mode

COMMAND

 

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

help

 

 

Displays help information.

13

logout

 

 

Exits from the CLI.

13

history

 

 

Displays a list of previous

13

 

 

 

command(s) that you have

 

 

 

 

executed.

 

exit

 

 

Exits from Config mode into

13

 

 

 

Enable mode.

 

mode

zynos

 

Changes the CLI mode to the

13

 

 

 

ZyNOS format.

 

password

<password>

 

Change the password for

14

 

 

 

accessing Enable mode.

 

246

Chapter 34 Introducing Commands